Finding the best pc cases under $100 comes down to prioritizing functional cooling layouts over aggressive exterior styling. Modern mid-tower enclosures at this price point deliver mesh front panels, flexible radiator mounting locations, and practical cable routing pathways.
Your primary decision centers on out-of-the-box fan provisioning versus internal component clearance. Some budget designs prioritize compact external dimensions, while others provide room for oversized graphics cards and motherboards with rear-facing power connectors.
Pros
- Supports up to 360mm front liquid cooling radiators
- Extensive fine mesh panels for ventilation and dust filtering
- Includes two pre-installed 120mm fans
- Built-in cable channels, hooks, and straps
- Perforated PSU shroud supports dedicated lower air intake
Cons
- Lower PSU shroud fans are not included
- Top radiator support is limited to 240mm
Pros
- Four pre-installed PWM ARGB fans included
- Supports back-connect ATX and Micro-ATX motherboards
- Generous clearance for GPUs up to 420mm
- Tool-less side panels for fast interior access
- Accommodates up to 360mm top-mounted radiators
Cons
- Relatively heavy chassis weighing over 18 pounds unbuilt
- Fans reach up to 30.8 dBA at maximum speed
Comparing the Top PC Cases Under $100
The table below summarizes key hardware specifications across both enclosures. Hardware builders should verify chassis dimensions against their intended graphics card length and liquid cooling hardware before purchasing.
| Chassis Model | Pre-Installed Fans | Top Radiator Support | Max GPU Length | Special Features |
|---|---|---|---|---|
| NZXT H5 Flow | 2x 120mm non-RGB | Up to 240mm | Not specified | Perforated PSU shroud for floor intake |
| Lian Li V100 | 4x 120mm PWM ARGB | Up to 360mm | Up to 420mm | Back-connect motherboard support |
Detailed Model Breakdown
NZXT H5 Flow – Compact ATX Mid-Tower PC Case
The NZXT H5 Flow targets builders seeking a compact footprint alongside focused internal ventilation. Its exterior features ultra-fine mesh panels across the top, front, and side sections to deliver unrestricted airflow while acting as a passive dust barrier.
Thermal management for demanding graphics hardware is handled through a perforated power supply shroud. This lower chamber accommodates two optional 120mm fans that direct ambient air upward into the expansion slots, supplementing the two included 120mm chassis fans located in the front and rear.
Liquid cooling setups require careful planning due to the compact profile. The front panel accepts radiators up to 360mm, while the top panel supports radiators up to 240mm. Builders should note that extracting peak cooling performance from the lower chamber requires purchasing two extra fans separately.
Lian Li V100-ATX Mid-Tower PC Case-Black-V100RX
The Lian Li V100 provides expansive internal volume tailored for large components and clean aesthetic layouts. It comes equipped with four pre-installed 120mm PWM ARGB fans and an integrated 26-LED accent strip that syncs with standard motherboard addressable headers.
Component compatibility remains a major strength for this enclosure. It supports graphics cards up to 420mm in length, CPU tower coolers up to 178mm tall, and standard 360mm liquid cooling radiators mounted along the top panel.
The chassis also accommodates back-connect ATX and Micro-ATX motherboards, allowing builders to route all wiring through the rear tray. Tool-less side panel mounting simplifies maintenance, though the spacious internal layout results in a slightly larger desk footprint than typical compact mid-towers.
Key Considerations for Sub-$100 PC Cases
Allocating funds wisely on an enclosure leaves more room in your budget for core processing components. When assembling a setup based on our budget battlestation guide, consider how chassis choices impact total building expenses.
Stock Fan Value Versus Expansion Needs
Cases arriving with four pre-installed PWM fans eliminate the immediate need for aftermarket cooling purchases. If an enclosure includes only two basic fans, calculate the added cost of auxiliary intake fans to ensure it still fits your overall component budget.
Radiator and Clearance Compatibility
Top radiator mounting is generally preferred for liquid cooling loops to avoid air bubbles accumulating near the pump block. Verify that your intended AIO cooler fits the top panel without colliding with high-profile motherboard heatsinks or memory modules.
Frequently Asked Questions
Are pre-installed case fans sufficient for gaming hardware?
Configurations featuring at least three pre-installed fans usually provide adequate airflow for midrange gaming processors and graphics cards. Enclosures equipped with only two fans may show elevated internal temperatures under sustained workloads unless extra intake fans are added.
What are back-connect motherboards and do they require special cases?
Back-connect motherboards position power, SATA, and fan headers on the rear of the circuit board rather than the front. They require specialized chassis cutouts on the motherboard tray to allow connectors to pass through, as found on the Lian Li V100.
Which Chassis Should You Choose?
Select the NZXT H5 Flow if you prefer a compact mid-tower with refined cable management channels and do not mind supplying additional cooling fans over time. Choose the Lian Li V100 if you want four included ARGB fans out of the box, top 360mm radiator support, and compatibility with modern rear-connecting motherboards.

Write Your Review
No reviews yet. Be the first to share your experience!